Code Amibroker Indicators

NIFTY thợ săn tín hiệu cho Amibroker (AFL)

by admin January 12, 2019 19 min read 0 comments

Key Takeaways

  • Market conditions and their impact on trading decisions
  • Key levels and price action analysis
  • Risk management strategies for this setup

Đặc biệt cho tiện lợi vui lòng xem xét với các cổ phiếu khác rủi ro của riêng bạn dựa trên cấu hình thay đổi số cấu hình.

sigwd=ParamToggle(“sigchange”,”weekly|daily”,1);
//HBS mean histogram buy sell and LHBS mean low buy high sell
field= ParamToggle(“field”,”fieldd|fieldw”,1);
font = ParamToggle(“font”,”Show|Hide”,1);
messageboard = ParamToggle(“Message Board”,”Show|Hide”,1);
prexplore= ParamToggle(“perce/buysell”,”pers|buysell”,1);
_SECTION_BEGIN(“BehgozinStrengthFinder2”);
//pa= Param(“pda”, 14, 1, 300, 1);//21
//p2a= Param(“pd2a”, 1, 1, 300, 1);//21
//p3a= Param(“pd4a”, 1, 1, 300, 1);//21
//p4a= Param(“pd5a”, 1, 1, 300, 1);//21
//r1a= RSI(14);
//r2a=WMA(r1a,pa);
//ra1=WMA(r2a,p2a);
//ra=WMA(ra1,p3a);
//Plot(ra,””,colorBlack,styleDots+styleThick);
//Behgozin Stock Strength Finder.
//Simply It shows the Strength of any Stock so you can select the best stock
//Also can be used as buy and sell system by crossing zero line
// It can be used in daily, weekly or monthly time frame. Also you can see the results by Exploration
//pdc= Param(“pdc”, 3, 1, 30, 1);
//pdc1= Param(“pdc1”, 10, 1, 30, 1);
pdc2= Param(“pdc2”, 43, 1, 300, 1);//11,27,43,30,27,16(43)
//CLN= Ref(C,3);
pdx= Param(“pdo”, 58, 1, 300, 1);//26,28,198,20,111,20(198)
pdy= Param(“pda”, 1, 1, 300, 1);//1,1,1,1
//pdyx= Param(“pdax”, 1, 1, 300, 1);//3,1,12,3(1)
Cwx=Param(“pdw”, 10, 1, 300, 1);//5,5,12,18,9(12)
Ca=Param(“pa”, 50, 1, 300, 1);//5,5,12,18,9(12)
Cb=Param(“pw”, 45, 1, 300, 1);//5,5,12,18,9(12)
Cba=Param(“pwa”, 14, 1, 300, 1);//5,5,12,18,9(12)
Cba=RSI(14);
ab=WMA(V,Cba);
Cln=(Cba+ab)/2;
Beh1=((CLN – WMA(CLN, pdx)) / WMA(CLN, pdy)) * 100;
beh=TSF(Beh1,Cb);
col = IIf( beh>=9 == beh>=-10,colorBlue,colorCustom12);
Plot(beh,””,col,styleLine);
Plot(9,””,colorBlack,styleLine);
Plot(-10,””,colorBlack,styleLine);
V2 = HHV(Beh,100);
V3 = LLV(Beh,100);
Beh1= TSF(Beh*(V2-V3),Ca);
beh1e=TSF(Beh1,pdc2);
beh1a=TSF(Beh1,Cb);
//Plot(beh1ee, ” “,colorYellow,styleNoTitle | styleLine | styleThick);
//cole = IIf( beh1e>=0,colorWhite,colorCustom12);
Buy =Cover=Cross( Beh,-9);// AND Cross(RSI(14),30);
Sell = Short=Cross(9,Beh);//AND Cross(70,RSI(14));
PlotShapes( Buy * shapeUpArrow + Sell * shapeDownArrow, IIf( Buy, colorBrightGreen, colorRed ) );
PlotShapes( Buy * shapeUpTriangle + Sell * shapeDownTriangle, IIf( Buy, colorBrightGreen, colorRed ) );
//PlotShapes( Buy * shapeHollowSmallCircle + Sell * shapeHollowSmallCircle, IIf( Buy, colorWhite, colorYellow ) );
PlotShapes(IIf(Buy,shapeUpArrow,shapeNone),colorGreen);
PlotShapes(IIf(Buy,shapeHollowUpArrow,shapeNone),colorWhite);
//PlotShapes(IIf(Buy,shapeHollowSmallCircle,shapeNone),colorWhite);
PlotShapes(IIf(Sell,shapeDownArrow,shapeNone),colorRed);
PlotShapes(IIf(Sell,shapeHollowDownArrow,shapeNone),colorWhite);
//PlotShapes(IIf(Sell,shapeHollowSmallCircle,shapeNone),colorWhite);
PlotShapes(IIf(Short,shapeDownTriangle,shapeNone),colorYellow);
PlotShapes(IIf(Short,shapeHollowDownTriangle,shapeNone),colorWhite);
//PlotShapes(IIf(Short,shapeHollowCircle,shapeNone),colorWhite);
PlotShapes(IIf(Cover,shapeUpTriangle,shapeNone),colorLightBlue);
PlotShapes(IIf(Cover,shapeHollowUpTriangle,shapeNone),colorWhite);
//PlotShapes(IIf(Cover,shapeHollowCircle,shapeNone),colorWhite);
for( i = 0; i < BarCount; i++ )
{
if( Buy[i] )
{
OUTcolor = ParamColor(“Outer Panel Color”,colorTeal);
INUPcolor = ParamColor(“Inner Panel Upper”,colorDarkGreen);
INDNcolor = ParamColor(“Inner Panel Lower”,colorDarkOliveGreen);
TitleColor = ParamColor(“Title Color “,colorBlack);
SetChartBkColor(OUTcolor); // color of outer border
SetChartBkGradientFill(INUPcolor,INDNcolor,TitleColor); // color of inner panel
}
if( Sell[i] )
{
OUTcolor = ParamColor(“Outer Panel Color”,colorTeal);
INUPcolor = ParamColor(“Inner Panel Upper2”,colorDarkRed);
INDNcolor = ParamColor(“Inner Panel Lower2”,colorPlum);
TitleColor = ParamColor(“Title Color “,colorBlack);
SetChartBkColor(OUTcolor); // color of outer border
SetChartBkGradientFill(INUPcolor,INDNcolor,TitleColor); // color of inner panel
}
}
if(font==0)
{
_SECTION_BEGIN(“Name”);
GfxSetOverlayMode(0);
GfxSelectFont(“Tahoma”, Status(“pxheight”)/8 );
GfxSetTextAlign( 6 );// center alignment
GfxSetTextColor( ColorHSB( 42, 42, 42 ) );
GfxSetBkMode(0); // transparent
GfxTextOut( Name(), Status(“pxwidth”)/2, Status(“pxheight”)/12 );
GfxSelectFont(“Tahoma”, Status(“pxheight”)/18 );
GfxTextOut(“” , Status(“pxwidth”)/2, Status(“pxheight”)/4 );
GfxSelectFont(“Tahoma”, Status(“pxheight”)/18 );
GfxSelectFont(“Tahoma”, Status(“pxheight”)/36 );
GfxTextOut( “”, Status(“pxwidth”)/2, Status(“pxheight”)/3 );
_SECTION_END();
//Magfied Market Price
GfxSetTextAlign( 6 );// center alignment
FS=Param(“Font Size”,72,11,100,1);
GfxSelectFont(“Times New Roman”, FS, 700, True );
GfxSetBkMode(0); // transparent
GfxSetTextColor( ColorHSB( 42, 42, 42 ) );
Hor=Param(“Horizonta Position”,615,1,1200,1);
Ver=Param(“Vertica Position”,152,1,830,1);
GfxTextOut(“”+C, Hor , Ver );
YC=TimeFrameGetPrice(“C”,inDaily,-1);
DD=Prec(C-YC,2);
GfxSetTextAlign( 6 );// center alignment
xx=Prec((DD/YC)100,2); FS2=Param(“Font Size2”,35,11,100,1); GfxSelectFont(“Times New Roman”, FS2,11, 700, True ); GfxSetBkMode( colorBlack ); Hor1=Param(“Horizontal Position”,615,1,1200,1); Ver1=Param(“Vertical Position”,188,1,830,1); GfxSetTextColor( ColorHSB( 42, 42, 42 ) ); GfxTextOut(“”+DD+” (“+xx+”%)”, Hor1 , Ver1+45 ); } else {{ //Magfied Market Price GfxSetTextAlign( 6 );// center alignment fse=Param(“Font Sizee”,35,11,100,1); GfxSelectFont(“Times New Roman”, fse, 700, True ); GfxSetBkMode( colorGold ); GfxSetTextColor( ParamColor(“Color”,colorGold) ); Hora=Param(“Horizontal Positiona”,525,1,1200,1); Vera=Param(“Vertical Positiona”,17,1,830,1); GfxTextOut(“”+C, Hora , Vera ); YCa=TimeFrameGetPrice(“C”,inDaily,-1); DDa=Prec(C-YCa,2); GfxSetTextAlign( 6 );// center alignment xxa=Prec((DDa/YCa)100,2);
FSb=Param(“Font Sizeb”,16,11,100,1);
GfxSelectFont(“Times New Roman”,fsb, 700, True );
GfxSetBkMode( colorBlack );
GfxSetTextColor(ParamColor(“Color”,colorYellow) );
GfxTextOut(“”+DDa+” (“+xxa+”%)”, Hora , Vera+45 );
_SECTION_END();
}}
Buy=ExRem(Buy,Sell);
Sell=ExRem(Sell,Buy);
AlertIf( Buy, “”, “BUY @ ” + C, 1 );
AlertIf( Sell, “”, “SELL @ ” + C, 2 );
no=Param( “Swing”, 8, 1, 55 );
tsl_col=ParamColor( “Color”, colorLightGrey );
res=HHV(H,no);
sup=LLV(L,no);
avd=IIf(C>Ref(res,-1),1,IIf(C<Ref(sup,-1),-1,0));
avn=ValueWhen(avd!=0,avd,1);
tsl=IIf(avn==1,sup,res);
no = Optimize(“TSL”,Param(“A (Change To Optimise)”,10, 1, 55 ,1),1, 55 ,1);
tsl_col=ParamColor( “Color”, colorLightGrey );
res=HHV(H,no);
sup=LLV(L,no);
avd=IIf(C>Ref(res,-1),1,IIf(C<Ref(sup,-1),-1,0));
avn=ValueWhen(avd!=0,avd,1);
dtsl=IIf(avn==1,sup,res);
SellPrice=ValueWhen(Short,C,1);
BuyPrice=ValueWhen(Buy,C,1);
Long=Flip(Buy,Sell);
Shrt=Flip(Short,Cover);
Relax = NOT Long AND NOT Buy AND NOT shrt AND NOT Sell AND NOT Sell AND NOT Cover;
SellSL=ValueWhen(Short,DTSL,1);
BuySL=ValueWhen(Buy,DTSL,1);
BuyDifference= BuyPrice – BuySL;
SellDifference = SellSL – SellPrice;
tar1 = IIf(Buy OR Long AND NOT Relax AND NOT Sell AND NOT Cover, (BuyPrice + BuyDifference), (SellPrice – SellDifference));
tar2 = IIf(Buy OR Long AND NOT Relax AND NOT Sell AND NOT Cover, (BuyPrice + (2BuyDifference)), (SellPrice – (2SellDifference)));
tar3 = IIf(Buy OR Long AND NOT Relax AND NOT Sell AND NOT Cover, (BuyPrice + (4BuyDifference)), (SellPrice – (4SellDifference)));
CloseAtEnd = ParamToggle(“Close Positions EOD”, “No|Yes”);
stopreverse =ParamToggle(“Switch To Stop And Reverse”,”No|Yes”,0);
Trend = ATR(21) < StDev (C,21); Range = ATR(21) > StDev (C,21);
no=10;
C13=20;
C14=2.1;
C15=12;
tsl_col=ParamColor( “Color”, colorLightGrey );
res=HHV(H,no);
sup=LLV(L,no);
avd=IIf(C>Ref(res,-1),1,IIf(C<Ref(sup,-1),-1,0));
avn=ValueWhen(avd!=0,avd,1);
dtsl=IIf(avd==1,sup,res);
SellPrice=ValueWhen(Short,C,1);
BuyPrice=ValueWhen(Buy,C,1);
Long=Flip(Buy,Sell);
Shrt=Flip(Short,Cover);
Relax = NOT Long AND NOT Buy AND NOT shrt AND NOT Sell AND NOT Sell AND NOT Cover;
SellSL=ValueWhen(Short,DTSL,1);
BuySL=ValueWhen(Buy,DTSL,1);
BuyDifference= BuyPrice – BuySL;
SellDifference = SellSL – SellPrice;
//tar1 = IIf(Buy OR Long AND NOT Relax AND NOT Sell AND NOT Cover, (BuyPrice + BuyDifference), (SellPrice – SellDifference));
//tar2 = IIf(Buy OR Long AND NOT Relax AND NOT Sell AND NOT Cover, (BuyPrice + (2BuyDifference)), (SellPrice – (2SellDifference)));
//tar3 = IIf(Buy OR Long AND NOT Relax AND NOT Sell AND NOT Cover, (BuyPrice + (4BuyDifference)), (SellPrice – (4SellDifference)));
buyach1 = IIf((Buy OR Long AND NOT Relax AND NOT Cover AND NOT Short AND NOT Shrt), H > tar1, 0);
buyach2 = IIf((Buy OR Long AND NOT Relax AND NOT Cover AND NOT Short AND NOT Shrt), H > tar2 , 0);
buyach3 = IIf((Buy OR Long AND NOT Relax AND NOT Cover AND NOT Short AND NOT Shrt), H > tar3, 0);
sellach1 = IIf((Short OR Shrt AND NOT Relax AND NOT Sell AND NOT Buy AND NOT Long), L < tar1 , 0);
sellach2 = IIf((Short OR Shrt AND NOT Relax AND NOT Sell AND NOT Buy AND NOT Long), L < tar2, 0);
sellach3 = IIf((Short OR Shrt AND NOT Relax AND NOT Sell AND NOT Buy AND NOT Long), L < tar3, 0);
// User-defined parameter for EMA periods
EMA_Type = Param(“EMA-1, TEMA-2, JMA-3”, 2, 1, 3, 1);
EMA_prds = Param(“EMA_periods”, 7, 1, 30, 1);
Std_MACD = Param(“Standard MACD? No-0, Yes-1”, 1, 0, 1, 1);
Plot_fashion = Param(“Bar+Arrows-1, Impulse Bars-2”, 2, 1, 2, 1);
// Allow user to define Weekly and Monthly Ribbon Location and Height
WR_P1 = Param(“Weekly Ribbon Location”, -10.5, -1000, 1000, 0.1);
WR_P2 = Param(“Weekly Ribbon Height”, 366.5, -0.001, 500, 0.1);
MR_P1 = Param(“Monthly Ribbon Location”, 5.2, -1000, 1000, 0.1);
MR_P2 = Param(“Monthly Ribbon Height”, 199, -0.001, 500, 0.1);
// Compute EMA and MACD Histogram
if(EMA_Type == 1)
{
DayEMA = EMA(Close, EMA_prds);
}
if (EMA_Type == 2)
{
DayEMA = TEMA(Close, EMA_prds);
}
if(EMA_Type == 3)
{
// Line below to be used with Jurik JMA
// DayEMA = JurikJMA(C, EMA_Prds);
}
Histogram = MACD() – Signal();
// Determine if we have an Impulse UP, DOWN or None
Impulse_Up = DayEMA > Ref(DayEMA, -1) AND Histogram > Ref(Histogram, -1);
Impulse_Down = DayEMA < Ref(DayEMA, -1) AND Histogram < Ref(Histogram, -1);
Impulse_None = (NOT Impulse_UP) AND (NOT Impulse_Down);
// Compute Weekly MACD and determine whether rising or falling
// Note: uses “non-standard” parameters!
TimeFrameSet(inWeekly);
if (Std_MACD == 0)
{
MACD_val = MACD(5, 8);
Signal_val = Signal(5, 8, 5);
}
else
{
MACD_val = MACD(12, 26);
Signal_val = Signal(12, 26, 9);
}
Hist_in_w = MACD_val – Signal_val;
wh_rising = Hist_in_w > Ref(Hist_in_w, -1);
wh_falling = Hist_in_w < Ref(Hist_in_w, -1);
TimeFrameRestore();
// Now get Monthly MACD Histogram….
TimeFrameSet(inMonthly);
MACD_val = MACD(5, 8);
Signal_val = Signal(5, 8, 5);
Hist_in_m = MACD_val – Signal_val;
mh_rising = Hist_in_m > Ref(Hist_in_m, -1);
mh_falling = Hist_in_m < Ref(Hist_in_m, -1);
TimeFrameRestore();
wh_rising = TimeFrameExpand( wh_rising, inWeekly, expandLast );
wh_falling = TimeFrameExpand( wh_falling, inWeekly, expandLast);
mh_rising = TimeFrameExpand(mh_rising, inMonthly, expandLast);
mh_falling = TimeFrameExpand(mh_falling, inMonthly, expandLast);
kol = IIf( wh_rising, colorGreen, IIf(wh_falling, colorRed,
colorLightGrey));
mkol = IIf( mh_rising, colorBlue, IIf(mh_falling, colorYellow,
colorLightGrey));
// Plot them all!
if (Plot_fashion == 1)
{
Plot(Close, “Close”, colorTeal, styleBar);
PlotShapes(shapeUpArrow * Impulse_Up, colorBlue, 0, Low, -12);
PlotShapes(shapeDownArrow * Impulse_Down, colorRed, 0, High, -12);
PlotShapes(shapeSmallCircle * Impulse_None, colorWhite, 0, High, 5);
}
else
{
bar_kol = IIf(impulse_UP, colorBlue, IIf(impulse_Down, colorRed,
colorWhite));
//Plot(C, “Close”, bar_kol, styleBar);
}
Plot(10, “ribbon”, kol, styleOwnScale|styleArea|styleNoLabel, WR_P1, WR_P2);//Weekly trend
Plot(10, “ribbon”, mkol, styleOwnScale|styleArea|styleNoLabel, MR_P1,
MR_P2); // Monthly Trend
// Explorer Section
// Determine if Impulse status is bullish, neutral or bearish. Display as Text Column.
Impulse_State = WriteIf(Impulse_Up, “Bul”, WriteIf(Impulse_Down,
“Bear”, “Neut”));
// Set the background color for Impulse Status Column
Impulse_Col = IIf(Impulse_Up, colorGreen, IIf(Impulse_Down, colorRed,
colorLightGrey));
// Determine Weekly Trend. Display as Text Column
Weekly_Trend = WriteIf(wh_rising, “Rising”, WriteIf(wh_falling, “Falling”,
“Flat!”));
Weekly_Col = IIf(wh_rising, colorGreen, IIf(wh_falling, colorRed,
colorLightGrey));
// Determine Monthly Trend. Display as Text Column
Monthly_Trend = WriteIf(mh_rising, “Rising”, WriteIf(mh_falling, “Falling”,
“Flat!”));
Monthly_Col = IIf(mh_rising, colorGreen, IIf(mh_falling, colorRed,
colorLightGrey));
// Determine how many bars has the current state existed
bars_in_bull = Min(BarsSince(impulse_none), BarsSince(impulse_down));
bars_in_bear = Min(BarsSince(impulse_up), BarsSince(impulse_none));
bars_in_neut = Min(BarsSince(impulse_down), BarsSince(impulse_up));
// Set a single variable to show number of bars in current state depending upon
// actual Impulse Status – Bullish, Bearish or Neutral
bars_in_state = IIf(Impulse_Up,bars_in_bull, IIf(Impulse_down, bars_in_bear,bars_in_neut));
//AddColumn(Close,”Close”,1.2);
// Columns for display in Explorer
//AddTextColumn(Impulse_State, “Status”, 1, colorWhite, Impulse_Col);
//AddColumn(bars_in_state, “Bars”, 1, colorWhite, Impulse_col);
//Action = WriteIf(Buy, “BUY”, WriteIf(Sell, “SELL”, ” “));
//i=0;
//bars_in_statee = IIf(Buy, BarCount[i], IIf(Sell, BarCount[i],bars_in_neut));
//bars=BarsSince(IIf(Buy+BarCount+1),OR( Sell-BarCount+1));
plus= Param(“plus”, 0.8,0,52,1);
Minus = Param(“Minus”, -0.8,-15,-0,-20);
prch = (C- TimeFrameGetPrice( “C”, inDaily, -1 ))/ TimeFrameGetPrice( “C”, inDaily, -1 )100 ; prcha= (C-Ref(C,-6))/Ref(C,-6)100;
prche= (C-Ref(C,-2))/Ref(C,-1)100; prchjk= (C-Ref(C,-2))+Ref(C,-1)10/1;
//prchjka=(prchjk)/10;
prchjka = (C+ TimeFrameGetPrice( “C”, inDaily, -1 ))- Close;
//Date()
//prchjk= (Date()-Ref(Date(),-1))+Ref(Date(),-1);
prch5=(prche-prch);
prch6= (C-Ref(C,-5))/Ref(C,-5)100; prch7= (C-Ref(C,-29))/Ref(C,-29)100;
prch8= (C-Ref(C,-87))/Ref(C,-87)100; prch9= (C-Ref(C,-150))/Ref(C,-150)100;
prch10= (C-Ref(C,-254))/Ref(C,-252)100; prch11= (C-Ref(C,-490))/Ref(C,-490)100;
prch12= (C-Ref(C,-735))/Ref(C,-735)100; prch13= (C-Ref(C,-1283))/Ref(C,-1283)100;
col=IIf ((Volume > 1.25 * EMA( Volume, 34 )),colorRed,colorLime);
//Col=IIf(( Buy, 66 , 83 ), formatChar, colorDefault, IIf( plus , colorGreen, colorRed ));
//Filter = prch6 <3 OR prch6 <-3 ; if(prexplore==0) {Filter = prch > plus OR prch < Minus ;
AddColumn(prchjka ,”prvClose”,colorDefault,Col,colorPlum);
AddColumn(Close,”Close”,1.2,colorDefault, Col);
AddColumn(prch5,”prviday”, 1.2,colorDefault, Col);
AddColumn(prch,”daily”, 1.2,colorDefault, Col);
//Filter=0;
AddColumn( IIf( Buy, 66 , 83 ), “Signal”, formatChar, colorDefault, IIf( Buy , colorGreen, colorRed ) );
AddColumn(Volume,”Volume”,1.0, colorDefault, IIf ((Volume > 1.25 * EMA( Volume, 34 )),colorCustom12,colorLime));
AddColumn(prch6,”weekly”, 1.2,colorDefault, Col);
AddColumn(prch7,”monthly”, 1.2,colorDefault, Col);
AddColumn(prch8,”qutrly”, 1.2,colorDefault, Col);
AddColumn(prch9,”halfyly”, 1.2,colorDefault, Col);
AddColumn(prch10,”yearly”, 1.2,colorDefault, Col);
AddColumn(prch11,”twoyrly”, 1.2,colorDefault, Col);
AddColumn(prch12,”thirdyrly”, 1.2,colorDefault, Col);
AddColumn(prch13,”fiveyrly”, 1.2,colorDefault, Col);
}
else
{
//Filter = Sell>-2 AND i<-3 OR Buy>2 AND i<3 ; AddColumn(ROC(V,1),”RVol “,1.2, IIf(ROC(V,1) > 0,colorDefault,colorYellow),Impulse_col);
AddColumn(bars_in_state ,”Bars”, 1, colorWhite, Impulse_col);
prchjka = (C+ TimeFrameGetPrice( “C”, inDaily, -1 ))- Close;
//AddColumn(C + C +1 ,”Close”,1.2,colorDefault, Col)/2;
AddColumn(prchjka ,”prvClose”,colorDefault,colorWhite, colorBlue);
//AddTextColumn(Weekly_Trend, “W Trend”, 1, colorWhite, Weekly_Col);
//AddTextColumn(Monthly_Trend, “M Trend”, 1, colorWhite, Monthly_Col);
//Filter = 1;
_SECTION_END();
//Settings for exploration
H1 = SelectedValue( TimeFrameGetPrice( “H”, inDaily, -1 ) );
L1 = SelectedValue( TimeFrameGetPrice( “L”, inDaily, -1 ) );
C1 = SelectedValue( TimeFrameGetPrice( “C”, inDaily, -1 ) );
H2 = SelectedValue( TimeFrameGetPrice( “H”, inDaily, 0 ) );
L2 = SelectedValue( TimeFrameGetPrice( “L”, inDaily, 0 ) );
O1 = SelectedValue( TimeFrameGetPrice( “open”, inDaily, 0 ) );
F4 = 0;
D1 = ( H1 – L1 );
D2 = ( H2 – L2 );
F1 = D1 * 0.433;
F2 = D1 * 0.766;
F3 = D1 * 1.35;
if ( D2 <= F1 )
F4 = F1;
else
if ( D2 <= F2 )
F4 = F2;
else
F4 = F3;
S_P = ( O1 – F4 );
B_P = ( O1 + F4 );
BP = ( L2 + F4 );
BPTGT = ( BP + ( BP * .0065 ) );//.0015 brokerage
BPSTPLS = ( BP – ( BP * .0085 ) );
SP = ( H2 – F4 );
SPTGT = ( SP – ( SP * .0065 ) );
SPSTPLS = ( SP + ( SP * .0085 ) );
p = ( H1 + L1 + C1 ) / 3;
s1 = ( H1 );
r1 = ( L1 );
r2 = SelectedValue( L2 );
s2 = SelectedValue( H2 );
//CONDITION
if (ParamToggle(“Tooltip shows”, “All Values|Only Prices”))
{
ToolTip = StrFormat(“Open: %g\nHigh: %g\nLow: %g\nClose: %g (%.1f%%) \nVolume: ” + NumToStr(V, 1), O, H, L, C, SelectedValue(ROC(C, 1)));
}
//space = Param(“Space on Chart”, 20, – 15, 50, 1);
//GraphXSpace = space;
//SetChartBkColor(ParamColor(“Background Color”, colorBlack));
// ================= Rasheed’s original code (with Lookback and Shift default set to his specs) =================
H0 = H;
L0 = L;
C0 = C;
O0 = O;
Lookback = Param(“LookBack”, 10, 10, 50, 1); // Default for interday commodity currency trading
shift = Param(“Shift”, 5, 1, 50, 1); // ?
x0 = LastValue(Cum(1));
x1 = x0 – shift;
H = Ref(H, – shift + 1);
L = Ref(L, – shift + 1);
H1 = LastValue(Ref(HHV(H, Lookback), – 1));
L1 = LastValue(Ref(LLV(L, Lookback), – 1));
//Plot(H1, “H1”, colorYellow);
//Plot(L1, “L1”, colorYellow);
H = H0;
L = L0;
C = C0;
O = O0;
up = Cross(H, H1)AND Cum(1) > x1;
dn = Cross(L1, L)AND Cum(1) > x1;
//Plot(C, “Close”, IIf(Cum(1) > x1 – Lookback AND Cum(1) <= x1, colorBlue, IIf(Up, colorBrightGreen, IIf(Dn, colorRed, IIf(C > O, colorGreen, colorRed)))), 64);
//PlotShapes(shapeDownArrow *(Cum(1) == x1 + 1), colorBlue);
// ======================= Exploration and Signal Code =================
TRIGGER = ParamToggle(“Trigger “, “CLOSE|HIGH OR LOW”);
XH1 = Cross(C, H1);
XL1 = Cross(L1, C);
XH2 = Cross(H, H1);
XL2 = Cross(L1, L);
if (TRIGGER == 0)
{
//Buy = XH1;
//Sell = XL1;
}
else
{
//Buy = XH2;
//Sell = XL2;
}
//TradeDisplay = ParamToggle(“Remove Extra Trades?”, “No|Yes”);
//if(TradeDisplay != 0){
//Buy = ExRem(Buy, Sell);
//Sell = ExRem(Sell, Buy); // THIS WILL REMOVE EXESS SIGNALS ON A CHART OR IN AN EXPLORATION
//}
//Filter = Buy >2 <3 == BarCount+1 OR Sell >-3<-3 == BarCount+1;
Action = WriteIf(Buy, “BUY”, WriteIf(Sell, “SELL”, ” “));
//AddTextColumn(IndustryID(1), “Industry Sector “, 30.0, colorBlue, colorYellow);
AddColumn(C, “Entry “, 2.2, colorWhite, colorBlue);
AddTextColumn(Action, “Action”, 8.0, IIf(xh1, colorDarkGreen, colorDarkRed), colorYellow);
AddColumn(IIf(XH1, H1, L1), “BREAKOUT LEVEL”, 3.2, colorYellow, IIf(XH1, colorDarkGreen, colorDarkRed));
// ———————————————————————————– Arrow signals — FOR TRADES ———————————————————-
//PlotShapes(Buy shapeUpArrow, colorBrightGreen, 0, L / ENTRY_TRAILARRAY */, – 30);
//PlotShapes(Sell *shapeDownArrow, colorLightYellow, 0, H, – 30);
_SECTION_END();
_SECTION_BEGIN(“Volume At Price”);
PlotVAPOverlay(Param(“Lines”, 1000, 100, 1000, 10), Param(“Width”, 15, 1, 100, 1), ParamColor(“Color”, colorBlue), ParamToggle(“Side”, “Left|Right”, 1) | 4 *ParamToggle(“Z-order”, “On top|Behind”, 1));
_SECTION_END();
//Filter = Buy OR Sell;
//AddColumn( IIf( Buy, 66, 1 ), “Buy”, formatChar, 1, bkcolor = IIf( Buy, 43, 33 ) );
//AddColumn( IIf( Sell, 83, 1 ), “Sell”, formatChar, 1, bkcolor = IIf( Sell, 25, 32 ) );
//AddColumn( C, “CMP”, 1.2, colorDefault, colorLightBlue );
//AddColumn( BP, “SELL PRICE”, 1.2, colorDefault, colorGreen );
//AddColumn( BPTGT, “TGT PRICE”, 1.2, colorDefault, colorBrown );
//AddColumn( BPSTPLS, “STPLS BUY”, 1.2, colorDefault, colorRed );
AddColumn( p, “PIVOT”, 1.2, colorDefault, colorYellow );
//AddColumn( SPSTPLS, “STPLS SELL”, 1.2, colorDefault, colorRed );
//AddColumn( SP, “SELL PRICE”, 1.2, colorDefault, colorGreen );
//AddColumn( SPTGT, “TGT PRICE”, 1.2, colorDefault, colorBrown );
//Settings for exploration
Filter=Buy OR Sell AND Cover OR Short;
AddColumn( IIf( Buy, 66 , 83 ), “Signal”, formatChar, colorDefault, IIf( Buy , colorGreen, colorRed ) );
//AddColumn(Close,”Entry Price”,1.4, colorDefault, IIf( Buy , colorGreen, colorRed ));
AddColumn(dtsl,”Stop Loss”,1.4, colorDefault, IIf( Buy , colorGreen, colorRed ));
AddColumn(tar1,”Target 1″,1.4, colorDefault, IIf( Buy , colorGreen, colorRed ));
AddColumn(tar2,”Target 2″,1.4, colorDefault, IIf( Buy , colorGreen, colorRed ));
AddColumn(tar3,”Target 3″,1.4, colorDefault, IIf( Buy , colorGreen, colorRed ));
AddColumn(Volume,”Volume”,1.0, colorDefault, IIf ((Volume > 1.25 * EMA( Volume, 34 )),colorBlue,colorYellow));
AddColumn( H1, “PRE-HIGH” );
AddColumn( L1, “PRE-LOW” );
AddColumn( D1, “PRE-DIFF” );
AddColumn( F1, “0.433” );
AddColumn( F2, “0.766” );
AddColumn( F3, “1.35” );
AddColumn( H2, “D-HIGH” );
AddColumn( L2, “D-LOW” );
AddColumn( D2, “D-DIFF” );
AddColumn( F4, “SELECT FACT” );
AlertIf( Buy , “SOUND C:\Windows\Media\chimes.wav”, “Audio alert”, 2 );
AlertIf( Sell , “SOUND C:\Windows\Media\alert.wav”, “Audio alert”, 2 );
}
//Short = Sell;
//Cover = Buy;
//Short = ExRem(Short, Cover);
//Cover = ExRem(Cover, Short);
pxHeight = Status( “pxchartheight” ) ;
xx = Status( “pxchartwidth”);
Left = 1100;
width = 310;
x = 5;
x2 = 280;
y = pxHeight;
dist = 2ATR(10); dist1 = 3ATR(10);
i=BarCount;
bars = i;
if(messageboard)
{
for( i = 0; i < BarCount; i++ )
{
if( Buy[i] )
{
// PlotText( “\nBuy:” + L[ i ] + “\nT= ” + (L[i]1.005) + “\nSL= ” + (L[i]0.9975), i, L[ i ]-dist[i], colorGreen, colorWhite );
// Signal Display Panel // SellPrice=ValueWhen(Sell,C,1); BuyPrice=ValueWhen(Buy,L[ i ]); Long=Flip(Buy,Sell); Shrt=Flip(Sell,Buy ); BuyStop2 = L[i]*0.9975; BuyTP1 = L[i]*1.070; BuyTP2 = L[i]*1.050; BuyTP3 = L[i]*1.035;
buyach1 = IIf((Buy OR Long AND NOT Relax AND NOT Cover AND NOT Short AND NOT Shrt), H > BuyTP3, 0);
buyach2 = IIf((Buy OR Long AND NOT Relax AND NOT Cover AND NOT Short AND NOT Shrt), H > BuyTP2, 0);
buyach3 = IIf((Buy OR Long AND NOT Relax AND NOT Cover AND NOT Short AND NOT Shrt), H > BuyTP1, 0);
GfxSelectFont( “Tahoma”, 13, 100 );
GfxSetOverlayMode( mode = 0 );
GfxSelectPen( colorBrightGreen, 3 );
GfxSelectSolidBrush( colorBrightGreen);
GfxRoundRect( x, y – 163, x2, y , 7, 7 ) ;
GfxSetTextColor( colorGold );
GfxTextOut( ( ” Trading System “),73,y-165);
GfxTextOut( (” “),27,y-160);
GfxSetBkMode(1);
GfxSelectFont( “Arial”, 10, 700, False );
GfxSetTextColor( colorBlue );
GfxSetTextAlign(0);
GfxSelectFont( “Tahoma”, 13, 100 );
GfxTextOut( WriteIf(L[ i ], “Buy Above: “+L[ i ],””), 13, y-140);
GfxSetTextColor( colorGold );
GfxTextOut( WriteIf(BuyStop2, “Long SL: “+(BuyStop2),””), 13, y-120);
GfxSetTextColor( colorWhite );
GfxTextOut( WriteIf(BuyTP1, “Buy TGT1: “+(BuyTP3),””), 13,y- 100);
GfxTextOut( WriteIf(BuyTP2, “Buy TGT2: “+(BuyTP2),””), 13,y- 80);
GfxTextOut( WriteIf(BuyTP3, “BuyTGT3: “+(BuyTP1),””), 13,y- 60);
GfxSetTextColor( colorViolet );
GfxTextOut( (“Current P/L : ” + WriteVal(IIf(Buy ,(C-BuyPrice),(C-BuyPrice)),2.2)), 88, y-22);
GfxTextOut( (“Buy Signal came ” + (BarCount-bars +1) * Interval()/3 + ” mins ago”), 13, y-40) ;
GfxTextOut
( (“” + WriteIf (buyach1, ” Done: “+BuyTP3,””)), 160, y-100);
GfxTextOut
( (“” + WriteIf (buyach2, ” Done: “+BuyTP2,””)), 160, y-80);
GfxTextOut
( (“” + WriteIf (buyach3, ” Done: “+BuyTP1,””)), 160, y-60);
// END of Signal Display Panel //
}
if( Sell[i] )
{
// PlotText( “Sell:” + H[ i ] + “\nT= ” + (H[i]0.995) + “\nSL= ” + (H[i]1.0025), i, H[ i ]+dist1[i], colorRed, colorWhite );
// Signal Display Panel // SellPrice=ValueWhen(Sell,C,1);
BuyPrice=ValueWhen(Buy,H[ i ]);
Long=Flip(Buy,Sell);
Shrt=Flip(Sell,Buy );
SellStop2 = H[i]1.0025; SellTP1 = H[i]0.978;
SellTP2 = H[i]0.982; SellTP3 = H[i]0.988;
sellach1 = IIf((Short OR Shrt AND NOT Relax AND NOT Sell AND NOT Buy AND NOT Long), L < SellTP3 , 0);
sellach2 = IIf((Short OR Shrt AND NOT Relax AND NOT Sell AND NOT Buy AND NOT Long), L < SellTP2, 0);
sellach3 = IIf((Short OR Shrt AND NOT Relax AND NOT Sell AND NOT Buy AND NOT Long), L < SellTP1, 0);
GfxSelectFont( "Tahoma", 13, 100 ); GfxSetOverlayMode( mode = 0 ); GfxSelectPen( colorRed, 3 ); GfxSelectSolidBrush( colorRed ); GfxRoundRect( x, y - 163, x2, y , 7, 7 ) ; GfxTextOut( (" "),27,y-160); GfxSetBkMode(1); GfxSelectFont( "Arial", 10, 700, False ); GfxSetTextColor( colorWhite ); GfxSetTextAlign(0); GfxSelectFont( "Tahoma", 13, 100 ); GfxSetTextColor( colorGold ); GfxTextOut( ( " Trading System "),73,y-165); GfxSetTextColor( colorWhite ); GfxTextOut( WriteIf(H[ i ], "Sell Below: "+H[ i ],""), 13, y-140); GfxSetTextColor( colorGold ); GfxTextOut( WriteIf(SellStop2, "Short SL: "+(SellStop2),""), 13, y-120); GfxSetTextColor( colorBlue ); GfxTextOut( WriteIf(SellTP1, "Short TGT1: "+(SellTP3),""), 13, y-100); GfxTextOut( WriteIf(SellTP2, "Short TGT2: "+(SellTP2),""), 13, y-80); GfxTextOut( WriteIf(SellTP3, "Short TGT3: "+(SellTP1),""), 13, y-60); GfxSetTextColor( colorGold ); GfxTextOut( ("Current P/L : " + WriteVal(IIf(Sell ,(SellPrice-C),(SellPrice-C)),2.2)), 88, y-22); GfxTextOut( ("sell Signal came " + (BarCount-bars +1) * Interval()/1 + " mins ago"), 13, y-40) ; GfxTextOut
( (“” + WriteIf (sellach1, ” Done: “+SellTP3,””)), 160, y-100);
GfxTextOut
( (“” + WriteIf (sellach2, ” Done: “+SellTP2,””)), 160, y-80);
GfxTextOut
( (“” + WriteIf (sellach3, ” Done: “+SellTP1,””)), 160, y-60);
// END of Signal Display Panel //
}}}
for( i = 0; i < BarCount; i++ )
{
if( Buy[i] )
{
OUTcolor = ParamColor(“Outer Panel Color”,colorTeal);
INUPcolor = ParamColor(“Inner Panel Upper”,colorDarkGreen);
INDNcolor = ParamColor(“Inner Panel Lower”,colorDarkOliveGreen);
TitleColor = ParamColor(“Title Color “,colorBlack);
SetChartBkColor(OUTcolor); // color of outer border
SetChartBkGradientFill(INUPcolor,INDNcolor,TitleColor); // color of inner panel
}
if( Sell[i] )
{
OUTcolor = ParamColor(“Outer Panel Color”,colorTeal);
INUPcolor = ParamColor(“Inner Panel Upper2”,colorDarkRed);
INDNcolor = ParamColor(“Inner Panel Lower2”,colorPlum);
TitleColor = ParamColor(“Title Color “,colorBlack);
SetChartBkColor(OUTcolor); // color of outer border
SetChartBkGradientFill(INUPcolor,INDNcolor,TitleColor); // color of inner panel
}
}
_SECTION_BEGIN(“Pivot calc”);
pd = Param(“Periods”,13,5,144,1);
pds = 2*pd-1;// (Adjustment for Wilders MA)
aa = Close-Ref(Close,-1);
uu = EMA(Max(0,aa),pds);
dd= EMA((Max(0,0-aa)),pds);
rf = IIf(C>2,1000,10000);
c1 = Param(“Upper Level”,70,50,90,1);
qq1 =100/(100-c1)-1;
ff1 = qq1dd-uu; ff2 = ff1/qq1; f1 = Max(ff1,ff2); UL = Close + f1(pds-1)/2;
UL = IIf(UL>C,floor(ULrf),ceil(ULrf))/rf;
c2 = Param(“Equilibrium”,50,50,50,0);
qq2 =100/(100-c2)-1;// [=1]
ff = dd-uu;
MM = Close + ff(pds-1)/2; MM = IIf(MM>C,floor(MMrf),ceil(MM*rf))/rf;
c3 = Param(“Lower Level”,30,10,50,1);
qq3 =100/(100-c3)-1;
ff1 = qq3dd-uu; ff2 = ff1/qq3; f3 = Min(ff1,ff2); LL = Close + f3(pds-1)/2;
LL = IIf(LL>C,floor(LLrf),ceil(LLrf))/rf;
band = Param(“band width”,4,0,15,0.25);
mmu = MM+band;
mmd = MM-band;
X=Cross( C,LL);
Y=Cross(UL,C);
Buy1= X ;
Sell1= Y ;
TimeFrameSet( in15Minute*2 );
DH=Ref(H,-1);
DL=Ref(L,-1);
DC=Ref(C,-1);
pd = ( DH+ DL + DC )/3;
sd1 = (2pd)-DH; sd2 = pd -(DH – DL); sd3 = Sd1 – (DH-DL); rd1 = (2pd)-DL;
rd2 = pd +(DH -DL);
rd3 = rd1 +(DH-DL);
TimeFrameRestore();
_SECTION_END();
Title =
EncodeColor(colorWhite)+ “Linkon’s Silver” + ” – ” + Name() + ” – ” + EncodeColor(colorRed)+ Interval(2)
EncodeColor(colorWhite) + ” – ” + Date() +” – “
+”\n”
+EncodeColor(colorYellow) +”Op-“+O+” “+”Hi-“+H+” “+”Lo-“+L+” “+ “Cl-“+C+” “+ “Vol= “+ WriteVal(V)
//+ WriteIf ((e3>e45) ,EncodeColor(colorLime)+ ” Direction : LONG”,EncodeColor(colorRed)+” Direction : SHORT”)
+”\n”
WriteIf (Sell , ” EXIT LONG / Reverse Signal at “+C+”\n”,””)
WriteIf (Buy , ” EXIT SHORT / Reverse Signal at “+C+”\n”,””)
+WriteIf(Sell , “Total Profit / Loss for the Last Trade Rs.”+(C-BuyPrice)+””,””)+
WriteIf(Buy , “Total Profit / Loss for the Last trade Rs.”+(SellPrice-C)+””,””)+
WriteIf(Long AND NOT Buy,EncodeColor(colorLime)+ “Trade : Long – Entry price Rs.”+(BuyPrice)+” Tgt : “+UL,””)+
WriteIf(shrt AND NOT Sell,EncodeColor(colorRed)+ “Trade : Short – Entry price Rs.”+(SellPrice)+” Tgt : “+LL,””)+”\n”+
WriteIf(Long AND NOT Buy, “Current Profit / Loss Rs.”+(C-BuyPrice)+””,””)+
WriteIf(shrt AND NOT Sell, “Current Profit / Loss Rs.”+(SellPrice-C)+””,””)
EncodeColor(colorBrightGreen)+ “\n R3 : “+ EncodeColor(colorWhite)+RD3
EncodeColor(colorBrightGreen)+ “\n R2 : “+ EncodeColor(colorWhite)+RD2
EncodeColor(colorBrightGreen)+ “\n R1 : “+ EncodeColor(colorWhite)+RD1 + EncodeColor(colorBrightGreen)+ ” UP TGT : “+ EncodeColor(colorWhite)+UL
EncodeColor(colorBlue)+ “\n Pivot : “+ EncodeColor(colorWhite)+pd+ EncodeColor(colorBlue)+ ” MIDPOINT : “+ EncodeColor(colorWhite)+MM
EncodeColor(colorRed)+ “\n S1 : “+ EncodeColor(colorWhite)+SD1 + EncodeColor(colorRed)+ ” BOT TGT : “+ EncodeColor(colorWhite)+LL
EncodeColor(colorRed)+ “\n S2 : “+ EncodeColor(colorWhite)+SD2
EncodeColor(colorRed)+ “\n S3 : “+ EncodeColor(colorWhite)+SD3;
//if (EndValue(Buy)==1) Say(“strong Buy dear”,1);
//if (EndValue(Sell)==1) Say(“strong Sell dear”,1);
//if (EndValue(Cover)==1) Say(” go long dear”,1);
//if (EndValue(Short)==1) Say(” go short dear”,1);

Trading Data Snapshot

Always verify current market conditions before executing any trade. Past performance does not guarantee future results.

A
admin
Trading analyst and market commentator with expertise in technical analysis, price action, and risk management. Dedicated to helping traders make informed decisions.

Leave a Reply